Aerated concrete masonry differs from masonry only in the adhesive used as a rule. Cement-sand mortar is used only for laying the first row, where it is necessary to align the row to the horizon level. All other rows of aerated concrete are laid on a thin layer of special glue using a tool such as a comb. Aerated concrete is a dusty material, and dust is formed during its sawing into blocks.
Therefore, it is not superfluous to acquire a brush to remove dust. For external walls, the most acceptable thickness is one block 500mm, and for internal partitions, it’s minimum width 100mm is also suitable. Again, waterproofing the walls at the bottom of the house is very important for good. It needs to be done from the base to a height of up to 0.5 m. To build house in NZ you can have the smartest options now.
In the latter case, a reinforcing belt is required. It should be noted that aerated concrete strongly absorbs water, and this indicates that high-quality, comprehensive waterproofing of the foundation is needed both vertical and horizontal insulation are used here. A well-designed foundation drainage system is indispensable.
Ceilings in the house …
